Aluminum Nitride Thin Film Piezoelectric Pressure Sensor for Respiratory Rate Detection.

In this study, we propose a low-cost piezoelectric flexible pressure sensor fabricated on Kapton® (Kapton™ Dupont) substrate by using aluminum nitride (AlN) thin film, designed for the monitoring of the respiration rate for a fast detection of respiratory anomalies. The device was characterized in the range of 15-30 breaths per minute (bpm), to simulate moderate difficult breathing, borderline normal breathing, and normal spontaneous breathing. These three breathing typologies were artificially reproduced by setting the expiratory to inspiratory ratios (E:I) at 1:1, 2:1, 3:1. The prototype was able to accurately recognize the breath states with a low response time (~35 ms), excellent linearity (R2 = 0.997) and low hysteresis. The piezoelectric device was also characterized by placing it in an activated carbon filter mask to evaluate the pressure generated by exhaled air through breathing acts. The results indicate suitability also for the monitoring of very weak breath, exhibiting good linearity, accuracy, and reproducibility, in very low breath pressures, ranging from 0.09 to 0.16 kPa. These preliminary results are very promising for the future development of smart wearable devices able to monitor different patients breathing patterns, also related to breathing diseases, providing a suitable real-time diagnosis in a non-invasive and fast way.

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride.

In aluminum electrolysis, the iron-rich cover material is formed on the cover material and the steel rod connecting the carbon anode. Due to the high iron content in the iron-rich cover material, it differs from traditional cover material and thus requires harmless recycling and treatment. A process was proposed and used in this study to recovery F, Al, and Fe elements from the iron-rich cover material. This process involved aluminum sulfate solution leaching for fluorine recovery and alkali-acid synergistic leaching for α-Al2O3 and Fe2O3 recovery were obtained. The optimal leaching rates for F, Na, Ca, Fe, and Si were 93.92, 96.25, 94.53, 4.48, and 28.87%, respectively. The leaching solution and leaching residue were obtained. The leaching solution was neutralized to obtain the aluminum hydroxide fluoride hydrate (AHFH, AlF1.5(OH)1.5·(H2O)0.375). AHFH was calcined to form a mixture of AlF3 and Al2O3 with a purity of 96.14%. The overall recovery rate of F in the entire process was 92.36%. Additionally, the leaching residue was sequentially leached with alkali and acid to obtain the acid leach residue α-Al2O3. The pH of the acid-leached solution was adjusted to produce a black-brown precipitate, which was converted to Fe2O3 under a high-temperature calcination, and the recovery rate of Fe in the whole process was 94.54%. Therefore, this study provides a new method for recovering F, Al, and Fe in iron-rich cover material, enabling the utilization of aluminum hazardous waste sources.

Failed Regenerative Endodontic Case Treated by Modified Aspiration-irrigation Technique and Apexification.

AIM: This report addresses the management of a large persistent discharging lesion in an 11-year-old boy. The report describes the use of aspiration-irrigation technique for the management of immature necrotic tooth with persistent discharge after a failed regenerative procedure. BACKGROUND: Regenerative endodontics aim to provide an increase in root canal width, length, and in apical closure. Alternative procedures, such as apexification, should be attempted when regeneration fails. If the canal cannot be dried to persistent discharge, the aspiration-irrigation technique can be used. The technique relies on using aspiration along with irrigation to remove pus from the periapical area. CASE DESCRIPTION: This is a case for an 11-year-old patient who had trauma to tooth #11, which resulted in the complicated crown fracture. He had an emergency management that included pulpectomy and intracanal medication at another clinic. Two years later, the patient was presented to our clinic. Upon examination, the diagnosis was previously initiated therapy with asymptomatic apical periodontitis in immature tooth #11. Regeneration was attempted first but failed. The mineral trioxide aggregate (MTA) plug was removed, and the canal had persistent pus discharge. The canal was filled with intracanal medication, and then 2 weeks later, the canal was filled with triple antibiotic paste (TAP). Next visit, and due to continuous discharge, tooth #11 was treated conservatively with an intracanal aspiration-irrigation technique. An IrriFlex needle attached to a high-volume suction was used to aspirate the cystic fluid. Mineral trioxide aggregate plug apexification was performed in a later visit and the tooth was restored. CONCLUSION: During the 3-month and 16-month follow-up, there was resolution of the symptoms, a decrease in the periapical lesion size, and soft tissues appeared within normal limits. CLINICAL SIGNIFICANCE: Regenerative procedures are a good option for immature necrotic teeth. These procedures may fail due to persistent pus discharge from the root canals. The aspiration-irrigation technique is a good treatment option in cases of consciously discharging canals. How to cite this article: Alsofi L, Almarzouki S. Failed Regenerative Endodontic Case Treated by Modified Aspiration-irrigation Technique and Apexification. J Contemp Dent Pract 2024;25(1):92-97.

3-Acetyl coumarin alleviate neuroinflammatory responses and oxidative stress in aluminum chloride-induced Alzheimer's disease rat model.

Alzheimer's disease (AD) is a neurodegenerative disorder that impairs mental ability and interrupts cognitive function. Heavy metal exposure like aluminum chloride is associated with neurotoxicity linked to neuro-inflammation, oxidative stress, accumulation of amyloid plaques, phosphorylation of tau proteins associated with AD like symptoms. The objective of the present investigation was to assess the effect 3-acetyl coumarin (3AC) in a rat model of AD. Preliminary screening was performed with SWISS ADME to check for the bioavailability of 3-AC and likeness score which proved favorable. 3-AC docked against Caspase 3, NF-κß and tau protein kinase I exhibited good binding energies. Male rats were divided into six groups (n = 5). AlCl3 (100 mg/kg BW) was administered for 28 days before starting treatment to induce AD. Normal control rats received vehicle. Treatment groups received 10, 20 and 30 mg/kg 3-AC for 28 days. Rivastigmine (2 mg/kg) was the standard. Behavioral tests (EPM, MWM) were performed at 7-day intervals throughout study period. Rats showed improved spatial memory and learning in treatment groups during behavioral tests. Rats were euthanized on day 28. Inflammatory markers (IL-1ß, IL-16 and TNFα) exhibited significant improvement (p < 0.001) in treated rats. Oxidative stress enzymes (SOD, CAT, GSH, MDA) were restored. Caspase3 and NF-κß quantified through qRT-PCR also decreased significantly (p < 0.001) when compared to disease control group. Levels of acetyl cholinesterase, dopamine and noradrenaline were also restored in treated rats significantly (p < 0.001). 3-AC treatment restored neuroprotection probably because of anti-inflammatory, anti-oxidant and anti-cholinesterase potential; hence, this can be considered a promising therapeutic potential alternative.

Reprint of: The Effect of Mineral Trioxide Aggregate Obturation Levels on the Outcome of Endodontic Retreatment: An Observational Study.

INTRODUCTION: No clinical studies have examined the effect of mineral trioxide aggregate (MTA) obturation levels on the outcome of endodontic retreatment. This retrospective study examined treatment outcomes in three cohorts that compared overfilling, flush filling, and underfilling after orthograde retreatment using MTA. METHODS: Two hundred fifty patients with 264 teeth diagnosed with previously treated root canals and apical periodontitis retreated in a private endodontic practice were included. All teeth received MTA obturation and the extent of the final filling level was measured in relation to the major apical foramen. After 6-month follow-ups, all nonhealing cases were treated surgically. After 24- to 72-month reviews, the effect of preoperative lesion size and the degree of MTA obturation level were assessed. Multiple linear regression and time-to-event analysis using Stata 17 software (StataCorp LLC, College Station, TX) were used to evaluate the data. RESULTS: Within the three cohorts, 99 out of 108 overfilled teeth (91.7%), 90 out of 103 flush fills (87.4%), and 10 out of 53 underfilled teeth (18.9%) healed and were successfully retreated without surgery at 48-months. When surgical outcomes were included, the combined healed proportion was 93.2%. Preoperative lesion size was found to be an important predictor for retreatment nonhealing. A 1-mm increase in lesion size at baseline resulted in an estimated 11% (95% CI 1.04, 1.18)-38% (95% CI 1.22, 1.58) increase in the risk of surgery. Compared to overfilling and flush filling, underfilling was associated with an approximately three-fold increase in requiring surgery and characterized by delayed healing. CONCLUSION: MTA obturation is a viable retreatment option for teeth with nonhealing endodontic treatment. MTA overfills or flush fillings do not adversely affect healing outcomes. However, MTA underfilling increases the chances for nonhealing and surgical intervention.

Biocompatibility of mineral trioxide aggregate and biodentine as root-end filling materials: an in vivo study.

This study evaluated the biocompatibility of mineral trioxide aggregate (MTA) and Biodentine (BD) as root-end filling materials. Six mongrel dogs were divided into two equal groups according to the evaluation period; group A: one month and group B: three months. Three premolars of the same quadrant in each arch were used, summing up 36 teeth (6 teeth/dog). These teeth were randomly subdivided into three subgroups according to the root-end filling material used: MTA, BD and no root-end filling material (control). Endodontic access cavities were performed for induction of periapical pathosis. After the infection period, root canal instrumentation and obturation were accomplished. One day after root canal procedures, root-end surgery was performed. Surgical access was achieved and the root-end was resected approximately 3 mm above the apex. Root-end cavity was prepared ultrasonically and filled with the tested materials. All samples were evaluated by radiography and histopathology (Inflammation and new hard tissue formation). Data were collected and subjected to statistical analysis. In group A, MTA subgroup exhibited significant higher mean inflammatory score than BD subgroup (P < 0.05) while no significant difference was recorded between MTA and BD subgroups in group B (P > 0.05). Regarding mean mineralization score, there was no significant difference between all subgroups in both groups A and B (P > 0.05). Biodentine exhibited favorable biocompatibility in the initial stage of healing than MTA and comparable biomineralization. Clinical relevance: Biodentine could be considered as an acceptable alternative to MTA in peri-radicular surgeries.

Impact of aluminum phosphide on development of the forensically important fly, Chrysomya albiceps (Diptera: Calliphoridae).

Chrysomya albiceps (Calliphoridae) is among the earliest successional fauna on human and animal cadavers. Some immature Calliphoridae can be useful for determination of post-mortem interval. Toxins, particularly pesticides, can affect the rate of insect growth. Aluminum phosphide (AlP) is an affordable insecticide that has not been adequately entomotoxicologically evaluated. So, the impact of AlP on the developmental rate of different stages of C. albiceps was investigated. Larvae of C. albiceps were reared on the rabbit carcasses containing AlP as a treated group, and distilled water as a control group. The substances were administered by a gastric tube. The duration needed for development of C. albiceps stages was documented. Body length, width and weight of larvae were measured after 24, 48, 72 and 96 h from egg hatching. The duration of development increased significantly in the treated group compared to the control group. Larvae body measurements were significantly smaller in the treated group than in the control group. Therefore, it was demonstrated that AlP significantly influences the size of C. albiceps larvae and extends their development. During forensic application, interpretation of C. albiceps data should be used with caution when aluminum phosphide may be the cause of death.

A comparison of [18F]AlF- and 68Ga-labeled dual targeting heterodimer FAPI-RGD in malignant tumor: preclinical evaluation and pilot clinical PET/CT imaging.

Due to the heterogeneity of tumors, strategies to improve the effectiveness of dual-targeting tracers in tumor diagnostics have been intensively practiced. In this study, the radiolabeled [18F]AlF-NOTA-FAPI-RGD (denoted as [18F]AlF-LNC1007), a dual-targeting heterodimer tracer targeting both fibroblast activation protein (FAP) and integrin αvß3 to enhance specific tumor uptake and retention, was synthesized and evaluated. The tracer was compared with [68Ga]Ga-LNC1007 in preclinical and clinical settings. METHODS: The preparation of [18F]AlF- and 68Ga-labeled FAPI-RGD was carried out with an optimized protocol. The stability was tested in PBS and fetal bovine serum (FBS). Cellular uptake and in vivo distribution of the two products were compared and carried out on the U87MG cell line and its xenograft model. The safety and dosimetry of [18F]AlF-LNC1007 PET/CT scan were evaluated in six patients with malignant tumors. RESULTS: Two radiolabeling protocols of [18F]AlF-/[68Ga]Ga-LNC1007 were developed and optimized to give a high yield of tracers with good stability. In vivo microPET images showed that the two tracers exhibited comparable pharmacokinetic characteristics, with high tumor uptake and prolonged tumor retention. In vivo distribution data showed that the target-to-non-target ratios of [18F]AlF-LNC1007 were similar to[68Ga]Ga-LNC1007. A total of six patients underwent [18F]AlF-LNC1007 PET/CT evaluation while two had head-to-head [18F]FDG PET/CT scans. The total body effective dose was 9.94E-03 mSv/MBq. The biodistribution curve showed optimal normal organ uptake with high tumor uptake and long retention of up to 3h p.i., and notably, the tumor-to-background ratio increased over time. CONCLUSION: We successfully prepared an [18F]AlF-LNC1007 dual-targeting PET probe with comparable performances as [68Ga]Ga-LNC1007. With prolonged tumor retention and tumor specificity, it produced good imaging quality in preclinical and clinical translational studies, indicating that [18F]AlF-LNC1007 is a promising non-invasive tracer for detecting tumors expressing FAP and/or integrin avß3, with the prospect of clinical implementation.

Evaluation of the genotoxicity, cytotoxicity, and bioactivity of calcium silicate-based cements.

BACKGROUND: As calcium silicate-based cements (CSCs) have found success in various vital pulp therapy applications, several new CSC products have emerged. This study aimed to assess the genotoxicity, cytotoxicity, and bioactivity of four CSCs by comparing the newly introduced materials Bio MTA+ and MTA Cem with previously studied materials, Biodentine and NeoMTA. METHODS: Genotoxicity was evaluated using the micronucleus (MN) assay in human peripheral blood lymphocyte cells, measuring MN frequency and nuclear division index (NDI). Cytotoxicity was assessed in human dental pulp stem cells through the Water-Soluble Tetrazolium Salt-1 (WST-1) colorimetric assay. Bioactivity was determined by ELISA, measuring the levels of angiogenic and odontogenic markers (BMP-2, FGF-2, VEGF, and ALP). Statistical analyses included ANOVA, Dunnet and Sidak tests, and Wald chi-square test. (p < .05). RESULTS: The MN frequency in the groups was significantly lower than that in the positive control group (tetraconazole) (p < .05). NDI values decreased with increasing concentration (p < .05). Bio MTA+ and NeoMTA showed decreased cell viability at all concentrations in 7-day cultures (p < .01). All materials increased BMP-2, FGF-2, and VEGF levels, with Biodentine and NeoMTA showing the highest levels of BMP-2 and FGF-2 on day 7. Biodentine displayed the highest VEGF levels on day 7. Biodentine and NeoMTA groups exhibited significantly higher ALP activity than the Bio MTA+ and MTA Cem groups by day 7. CONCLUSION: Bio MTA+ and MTA Cem demonstrated no genotoxic or cytotoxic effects. Moreover, this study revealed bioactive potentials of Bio MTA+ and MTA Cem by enhancing the expression of angiogenic and osteogenic growth factors.

Rutin, Puerarin and Silymarin Regulated Aluminum-Induced Imbalance of Neurotransmitters and Metal Elements in Brain of Rats.

Non-specifically binding of aluminum to various substances in the organism can result in toxicity. The accumulation of large amounts of aluminum can cause an imbalance in metal homeostasis and interfere with the synthesis and release of neurotransmitters. Flavonoids have strong metal chelating activity, which can reduce damage to the central nervous system. The purpose of this study was to investigate the protective effect of three representative flavonoids, rutin, puerarin and silymarin, on the brain toxicity induced by long-term exposure to aluminum trichloride (AlCl3). Sixty-four Wistar rats were randomly divided into eight groups (n = 8). The rats in six intervention groups were given 100 or 200 mg/kg BW/day of three different flavonoids for four weeks after a 4-week exposure to 281.40 mg/kg BW/day AlCl3·6H2O, while the rats in the AlCl3-toxicity and control groups were given the vehicle after the period of AlCl3 exposure. The results showed that rutin, puerarin, and silymarin could increase the concentrations of magnesium, iron, and zinc in the brains of the rats. Moreover, the intake of these three flavonoids regulated the homeostasis of amino acid neurotransmitters and adjusted the concentrations of monoamine neurotransmitters to normal levels. Taken together, our data suggest that rutin, puerarin, and silymarin could ameliorate AlCl3-induced brain toxicity in the rats by regulating imbalance of metal elements and neurotransmitters in the brains of rats.

Protective effect of resveratrol and tannic acid combination on aluminium chloride induced neurotoxicity in rats.

OBJECTIVE: Alzheimer's disease is a progressive neurodegenerative disease and one of the most common causes of dementia. Despite recent advancements, there exists an unmet need for a suitable therapeutic option. This study aimed to evaluate the protective effects of the combination of resveratrol (20 mg/kg/day p.o.) and tannic acid (50 mg/kg/day p.o.) to reduce aluminium trichloride-induced Alzheimer's disease in rats. METHODS: Wistar rats weighing 150-200g were administered with aluminium chloride (100 mg/kg/day p.o.) for 90 days to induce neurodegeneration and Alzheimer's disease. Neurobehavioral changes were assessed using novel object recognition test, elevated plus maze test, and Morris water maze test. Histopathological studies were performed using H&E stain and Congo Red stains to check amyloid deposits. Further oxidative stress was measured in brain tissue. RESULTS: Aluminium trichloride treated negative control group showed cognitive impairment in the Morris water maze test, novel object recognition test, and elevated plus maze test. Further, the negative control group showed significant oxidative stress, increase amyloid deposits, and severe histological changes. Treatment with the combination of resveratrol and tannic acid showed significant attenuation in cognitive impairment. The oxidative stress markers and amyloid plaque levels were significantly attenuated with the treatment. CONCLUSION: The present study indicates the beneficial effects of resveratrol-tannic acid combination in AlCl3 induced neurotoxicity in rats.

Effect of Recombinant Human Platelet-Derived Growth Factor on Healing of Chronic Periapical Tissue Pathosis Following Apical Surgery in a Canine Model: A Histomorphometric and Microcomputed Tomography Analysis.

This canine in vivo study assessed the effect of recombinant human platelet-derived growth factor (rhPDGF) on the healing of periapical tissues following apical surgery. From a total of 96 premolar teeth, 64 teeth from six beagle dogs (2 years old) were classified as experimental and were randomly assigned to four experimental groups (16 teeth per group). After having the pulp extirpated, leaving teeth open to the oral cavity for 1 week, and sealing with an immediate restorative material for 8 weeks, nonsurgical endodontic treatment was performed. A split-mouth design was used, and intra-animal randomization of treatment sides was applied to the groups as follows: apical curettage + 1.5-mm root-end resection (Group 1); apicoectomy + mineral trioxide aggregate (MTA) root-end filling (Group 2); apicoectomy + MTA root-end filling + rhPDGF (Group 3); and apical curettage + rhPDGF (Group 4). The animals were sacrificed 24 months after apical surgery, and histologic and µCT analyses were performed for bone volume loss (BVL). Group 1 showed partial resolution of the periapical lesions without signs of tissue regeneration (BVL: 49.09 ± 10.97 mm3). Group 2 had minimal bone regeneration and showed cementum reformation in 9 teeth, with no direct attachment to the MTA (BVL: 35.34 ± 10.97 mm3). Group 3 showed regeneration of all damaged apical tissues without direct contact between the cementum and MTA (BLV: 4.51 ± 1.55 mm3). Group 4 showed regeneration of PDL, bone, and cementum and attachment of functional cementum fibers (BVL: 2.82 ± 2.3 mm3). The difference in BVL was statistically significant only for Groups 1 and 2 (P < .05). rhPDGF may help regenerate apical tissue structures following apical surgery.

Application of PAT Probes in Aluminum Phosphate Adjuvant Manufacturing.

PURPOSE: This study is focused on monitoring process parameters and quality attributes of aluminum phosphate (AlPO4) using multiple in-line probes incorporated into an industrial-scale adjuvant suspension manufacturing unit. METHODS: The manufacturing of aluminum adjuvant suspension was monitored at manufacturing scale using conductivity, turbidity, infrared, and particle sizing and count probes to follow the continuous evolution of particle formation and size distribution, and the reaction kinetics during the synthesis of AlPO4. RESULTS: The data showed that AlPO4 forms large particles at the early stages of mixing, followed by a decrease in size and then stabilization towards the later stages of mixing and pH adjustment. The results provided a complementary view of process events and assisted in optimizing several parameters, e.g., flow rate of reactants AlCl3 and Na3PO4 solutions, mixing rate, pH, and conductivity of AlPO4, as well as adjuvant quality attribute such as particle size, thus streamlining and shortening the process development stage. CONCLUSION: The results of this study showed the usefulness of the in-line probes to automate continuous assessment of AlPO4 batch-to-batch consistency during in-house adjuvant production at the industrial scale.

Insulin-euglycemia therapy in acute aluminum phosphide poisoning: a randomized clinical trial.

Introduction: Aluminum phosphide is a pesticide that is used in developing countries. Aluminum phosphide poisoning has a high mortality rate and there is no known antidote. This study aimed to evaluate the safety and efficacy of insulin-euglycemia therapy in the management of patients with acute aluminum phosphide poisoning.Methods: This trial was prospectively registered in the Pan African Clinical Trials Registry (PACTR202008534546951). A total of 108 patients were randomly allocated to two groups. The intervention group received insulin-euglycemia therapy in addition to standard treatment (norepinephrine and supportive care); the control group received standard treatment plus placebo. The main outcome measures were survival, blood pressure, and laboratory investigations.Results: The two groups had similar baseline parameters. Insulin-euglycemia therapy was associated with a significant reduction in mortality compared with that in the control group (64.8 percent and 96.3 percent, respectively; P value <0.001). Patients randomized to insulin-euglycemia also required lower doses of vasopressors (median was 7 mg versus 26 mg in control group; P value 0.006) and fewer patients needed intubation (61.1 percent versus 81.5 percent in the control group; P value 0.019). Insulin-euglycemia therapy significantly improved blood pressure (systolic, diastolic, and mean arterial pressure) (median at 6h post-admission was 80 mmHg, 55 mmHg and 65 mmHg compared with 20 mmHg, 10 mmHg and 13 mmHg in the control group respectively; P value <0.001) and bicarbonate and lactate concentrations.Conclusion: Insulin-euglycemia therapy appears to be a safe and effective treatment option for patients with aluminum phosphide poisoning. Vasopressor only therapy was associated with very poor outcomes in acute aluminum phosphide poisoning.

Comparison of Marginal Adaptation, Surface Hardness and Bond Strength of Resected and Retrofilled Calcium Silicate-based Cements Used in Endodontic Surgery: An In Vitro Study.

AIMS: This study compared the effects of orthograde and retrograde methods on marginal adaptation, surface hardness, and push-out bond strength (POBS) of three calcium silicate-based used in endodontic surgery. MATERIALS AND METHODS: Ninety single-rooted human mandibular premolars were randomly assigned into six groups (n = 15/group): groups I and II, ProRoot mineral trioxide aggregate (MTA) with orthograde and retrograde methods; groups III and IV, Biodentine (BD) with orthograde and retrograde methods; groups V and VI, iRoot BP Plus (BP-RPM) with orthograde and retrograde methods. After obturation, the apical 3 mm of each root was sectioned into two 1-mm-thick root slices and evaluated for marginal adaptation using a scanning electron microscope, surface hardness using Vickers hardness tester and POBS using a universal testing machine. RESULTS: Orthograde placement had a higher maximum gap width than retrograde placement (p < 0.05), but there was no significant difference among the tested materials (p > 0.05). Biodentine exhibited lower surface hardness than ProRoot MTA and iRoot BP Plus (p < 0.05), but there was no significant difference between ProRoot MTA and iRoot BP Plus (p > 0.05). Orthograde placement had higher POBS compared with retrograde placement (p < 0.05). Biodentine had higher POBS than iRoot BP Plus (p < 0.05), but no significant difference from ProRoot MTA (p > 0.05). The failure mode was mainly mixed for all the tested materials regardless of material type or placement technique. CONCLUSION: The retrograde method had better marginal adaptation; however, the orthograde method provided better dislodgement resistance. Biodentine had lower surface hardness than MTA and iRoot BP Plus with both techniques, whereas iRoot BP Plus demonstrated lower dislodging resistance than BD. CLINICAL SIGNIFICANCE: The current findings suggest that orthograde technique, a simpler periapical surgery, with ProRoot MTA provides potentially better surface hardness and POBS than BD and iRoot BP Plus in single-canal teeth.

Efficacy of intravenous N acetylcysteine as an adjuvant therapy in the treatment of acute aluminum phosphide Poisoning: a systematic review and meta-analysis.

BACKGROUND: Aluminum phosphide toxicity is a serious problem in many countries. Unfortunately, there is no specific antidote. N-acetylcysteine has been used in some studies as adjuvant therapy depending on to its antioxidant properties. We hypothesized that IV N-acetylcysteine is effective in reducing mortality rate compared to supportive treatment alone. METHODS: We searched in PubMed, Scopus, Web of Science, and Cochrane Library databases. We only included randomized controlled trials that assessed the efficacy of IV N-acetylcysteine and supportive treatment versus supportive treatment alone in acute aluminum phosphide poisoning. Four investigators independently screened the studies' results and designed the data extraction sheet. The primary and secondary outcomes were mortality and the need for mechanical ventilation rates. Random effects estimators with weights were used to result in the pooled risk ratios. RESULTS: We included four randomized controlled trials with 177 patients. 91 patients were distributed in N-acetylcysteine group and 86 patients in the control group. Mortality rates in N-acetylcysteine group and in the control group were 43.95% 66.27% respectively. There was a statistically significant reduction in mortality rate after leave out test (pooled risk ratio, 0.5; 95% confidence interval, 0.32-0.77). Regarding the need for mechanical ventilation, it was measured only in three RCTs. It was assessed in 67 patients in N-acetylcysteine group and 60 patients in the control group. 24 patients were ventilated in N-acetylcysteine group (35.8%) and 29 patients in the control group (48.3%). But it was statistically nonsignificant (pooled risk ratio, 0.71; 95% confidence interval, 0.48-1.04). CONCLUSION: Our meta-analysis revealed that IV N-acetylcysteine may be effective in reducing mortality of severe aluminum phosphide poisoning cases. TRIAL REGISTRATION: Registration number in Prospero CRD42022375344 on 25 NOVEMBER 2022, retrospectively registered.

Myco-fabricated ZnO nanoparticles ameliorate neurotoxicity in mice model of Alzheimer's disease via acetylcholinesterase inhibition and oxidative stress reduction.

Alzheimer's disease (AD) is one of the primary health problems linked to the decrease of acetylcholine in cholinergic neurons and elevation in oxidative stress. Myco-fabrication of ZnO-NPs revealed excellent biological activities, including anti-inflammatory and acetylcholinesterase inhibitory potentials. This study aims to determine if two distinct doses of myco-fabricated ZnO-NPs have a positive impact on behavioral impairment and several biochemical markers associated with inflammation and oxidative stress in mice that have been treated by aluminum chloride (AlCl3) to induce AD. Sixty male mice were haphazardly separated into equally six groups. Group 1 was injected i.p. with 0.5 ml of deionized water daily during the experiment. Mice in group 2 received AlCl3 (50 mg/kg/day i.p.). Groups 3 and 4 were treated i.p. with 5 and 10 mg/kg/day of ZnO-NPs only, respectively. Groups 5 and 6 were given i.p. 5 and 10 mg/kg/day ZnO-NPs, respectively, add to 50 mg/kg/day AlCl3. Results showed that the AlCl3 caused an increase in the escape latency time and a reduction in the time spent in the target quadrant, indicating a decreased improvement in learning and memory. Moreover, acetylcholinesterase enzyme (AChE) activity and malondialdehyde (MDA), tumor necrosis factor-alpha (TNF-α), and interleukin 1ß (IL-1ß) levels were significantly increased, and the content of glutathione (GSH), activities of superoxide dismutase (SOD), catalase (CAT), alanine aminotransferase (ALT), and aspartate aminotransferase (AST), as well as levels of serotonin and dopamine, were decreased in brain tissues only in AlCl3 treated mice. However, treatment of mice with myco-fabrication of ZnO-NPs at doses of 5 or 10 mg/kg improves learning and memory function through ameliorate all the previous parameters in the AD mice group. The low dose of 5 mg/kg is more effective than a high dose of 10 mg/kg. In accordance with these findings, myco-fabricated ZnO-NPs could enhance memory and exhibit a protective influence against memory loss caused by AlCl3.

Nicotine-magnesium aluminum silicate complexes processed by blending: Characterization for usage as drug carriers in mucoadhesive buccal discs.

Complexation of nicotine (NCT) and magnesium aluminum silicate (MAS) has been formed in the dispersions that required multiple preparation steps. In this study, physical blending was used to produce NCT-MAS complexes. NCT, a free-base liquid state form, was adsorbed onto the MAS granules, where the diffusion and intercalation of NCT molecules into the MAS silicate layers occurred. These processes required a minimum of the 7-d-resting period to reach NCT complete distribution. FTIR, XRD, and 29Si NMR suggest that NCT could interact with MAS via hydrogen bonding, water bridging, and ionic electrostatic force. The 12 % NCT-MAS complexes enabled a sustained release of NCT, after a 2-min burst, in pH 6 phosphate buffer through a particle diffusion-controlled mechanism. Buccal discs formulated with NCT-MAS complexes and sodium alginate (SA) as drug carriers and matrix former could control NCT released through drug diffusion and swelling-controlled mechanisms. NCT release and membrane permeation increased with increasing NCT-MAS complexes or decreasing SA concentration. All NCT-MAS-containing buccal discs exhibited mucoadhesive properties related to the swelling characteristics of SA and MAS. Conclusively, NCT-MAS complexes can be produced through an uncomplicated single-step blending process, and the complexes obtained presented a potential to serve as drug carriers in buccal matrix formulations.